Engineered blend of cellulose fibers and perlite for optimal filter aid performance Provides a stable, porous filtration layer with excellent particle retention Enhances filtration flow rates while minimizing clogging and pressure buildup Ideal for pre-coat filtration systems, including rotary drum and vacuum filters Free of diatomaceous earth — safer handling and reduced environmental impact AEB Fibroxcel 30 is a high-performance filtration aid composed of purified cellulose fibers and perlite, specifically designed to improve clarity and flow in wine, cider, juice, and other beverage filtration. Used as a pre-coat layer, Fibroxcel 30 creates a uniform, porous structure that traps particulates while maintaining excellent permeability and minimizing pressure increases. It’s particularly effective on rotary drum vacuum filters and other pre-coating systems where filter cake stability and throughput are critical. As a non-DE alternative, it offers safer handling, easier disposal, and improved environmental compatibility. Usage Protocol Fibroxcel 30 is typically used to form a pre-coat layer on filter surfaces prior to filtration. May also be used in combination with finer grades (e.g., Fibroxcel 15 or 20) for multi-stage filtration setups. Pre-mix with clean water or product before dosing into the filtration system.   Dosage Guidelines (Generic – adjust based on system and turbidity) Application Type Typical Dosage Pre-coat layer 300–600 g/m² of filter surface Body feed (if applicable) 0.1–0.3 g/L of product being filtered Note: Dosage depends on the type of filtration system, product load, and desired clarity. Always conduct pilot trials to fine-tune use rates.