Login

DESCRIPTION The onyx is a newly designed carabiner with an integrated pulley, featuring a true HMS style frame that allows for faster and easier connection of the carabiner to a wide variety of objects, as well as a widened sheave that helps ensure the rope stays in place. The Onyx is not designed to replace a pulley in every rigging application. Acceptable Uses: The Onyx should ONLY be used in the following configurations• Redirection Pulley in Rapid Ascent and Descent (RAD) configurations.• Traveling Pulley for Mechanical Advantage Systems to be used towards the load, ahead of asuitable progress capture device for the raising system.• Change of direction behind the systems main progresscapture   Unacceptable Uses: This is NOT an exhaustive list• Used as an Elevated Change of Direction• Highline/skate block applications• As a connector for a climbing system• Terminating a rope onto the bottom of the frame• All uses not strictly outlined in the acceptable uses section     WARNING: THE ONYX IS NOT DESIGNED OR INTENDED TO REPLACE A PULLEY IN EVERY RIGGING APPLICATION.Orientation of the Onyx should be carefully monitored during use to ensure that the carabiner is loaded in-line along the major axis. Ensurethe rope does not become loaded below the gate’s rivet (minor axis) while moving.• The bottom of the carabiner frame, below the pulley, is not a becket and shallnot be used as a connection point.• Ensure the carabiner gate is functioning freely and locks completely asverified by a multi-click function test.• Remove equipment from service immediately upon notice of damage. Weight: 4.9 ozRope Size: 7 – 13 mmWLL: 4 kNMajor Axis Strength: 20 kNMinor Axis Strength: 8 kNOpen Gate Strength: 7 kN