Registrieren

Registierung erfolgt in Kürze...
Fleebs-Logo
Details werden geladen...

Netafim Techline EZ Dripline .92 GPH Flow, 12 Inch Emitter Spacing - 500 Foot Coil

Techline™ EZ Ideal for small and medium areas, Techline™ EZ offer one coil, two fittings and less than one-hour installation. It's the simplest solution for small sites. Netafim's Techline™ EZ is the 12mm dripline for on-surface looped systems that installs fast, saves water and "disappears" into the landscape. Why Techline™ EZ? The first anti-siphon emitter in Landscape dripline, successfully used in harsh agricultural applications before its introduction into Landscape. The emitter is pressure compensating and continuous flushing, the anti-siphon feature prevents ingestion of debris into the tubing caused by vacuum. Laser Etched, For Easy Identification Made With Post-Consumer Recycled Material Qualifies for Use on Leed Projects UV Resistant Tubing Self-Contained, One-Piece Dripline Construction Product Advantages Less Visually Obtrusive12mm diameter tubing is less noticeable in landscape installations. Self-Contained, One-Piece Dripline ConstructionAssures reliable, easy installation. Flexible UV Resistant TubingAdapts to any planting area shape – tubing curves at a 6″ radius. On-surface installations withstand heat and direct sun. More Cost-Effective in Smaller Bed Areas24% smaller diameter tubing. Applications Subsurface or on-surface installations Bed areas that require shorter lateral lengths Areas subject to vandalism Planting areas Curved, narrow, and angular planting areas Flower beds, trees, and shrubs Rooftop gardens Vegetable gardens Green walls High traffic or high liability areas Raised planters Specifications Emitter flow rates: 0.26, 0.4, 0.6 and 0.9 GPH Emitter spacings: 6″, 12″, and 18″ (6″ available for 0.26 and 0.4 GPH only) Uses 12mm Netafim Insert Fittings or any compression fitting for 0.426″ diameter tubing Pressure compensation range: 6 to 58 psi Bending radius: 6″ Maximum system pressure: 58 psi Minimum pressure required: 6 psi Tubing diameter: .510″ O.D.; .426″ I.D. Coil length: 200′, 250′, 300′, 500′, 1,000′ Recommended minimum filtration: 120 mesh Diaphragm made of silicon′ ISO 9261 Standard Compliance
38,23 $