Login

Saw blade (1 piece). NOTICE: Necessary for use with the tool holder NOT INCLUDED in this link, please click the image below to purchase it if needed. Material: Overall combined with solid tungsten steel, iron cutting like mud, using special steel lattice mixed processing, impact resistance, high temperature resistance, long service life. Mirror effect on both sides, good gloss. General leveling design, smooth surface, smooth and efficient cutting. Processing: Accuracy: Inner Hole--+0.01~0.02 External--±0.02 Saw: Precision grinding machining of saw teeth, scientific angle design, sharp and smooth processing, no burn, no roll edge, no burrs. The thinner the saw blade, the more sensitive it is to vibration and traction during use. If radial or axial eccentricity is present, it is easy to cause damage. Naughty. Therefore, the milling machine should work in a stable state, that is, the machine tool has high accuracy, good rigidity of the cutter bar and stable transmission. Feed per dente quantity Constant and sufficient cooling. The specific requirements are as follows: <;0.02mm, axial eccentricity 0.01mm 2. As long as the milling depth of the cutter is not affected, fix the two sides of the blade on the cutter rod as much as possible with a large flanged plate, to eliminate vibration and avoid lateral compression. Generally, the diameter of the flanged plate is not less than 1/3 of the outer diameter of the saw blade. 3. You need to select a linear milling speed Vc and a reasonable feed rate Sz for tooth. Generally, under the same conditions, the whole hard alloy saw blade cutter can choose Vc faster than the high-speed steel saw blade cutter, but the feed rate for tooth should be lower than the feed rate of high-speed steel. Sz can generally be set between 0.005 and 0.025/tooth. Specific parameters should be determined by the user according to the speed of the milling machine, milling properties, thickness, number of teeth, milling depth and other factors are determined. Vc: P: 70~150, 50~80 K:80~120 M:70~120 cm N:200~350 s:20~50 Outer Diameter: Cutting Depth 40mm-3mm 50mm--5mm 63mm-8mm 70mm-10mm 75mm-12mm 80mm-15mm 100mm-20mm 125mm-30mm ========== Highly worrying chemical: None is_customized: yes Origin: Mainland China Finish: White Model Number:Sawmill Blade Material: Tungsten Carbide Steel Size: 40mm Number of pieces: 1 piece Blade Type: Circular Saw Blades Usage: commercial production Teeth: 72 Size: 50-70mm Number of pieces: 1 piece Blade Type: Circular Saw Blades Usage: commercial production Teeth: 72 Color 63mm-d16 Model FDIdDF Brand Name FDIdDF Part Number FDIdDF Manufacturer FDIdDF